depth gage

深度规

1. 测深规：外缩孔;凹陷(铸疵) depression | 测深规 depth gage | 冷硬深度 depth of chill

2. 深度规：depreciation 折旧 | depth gage 深度规 | depth micrometer 深度千分尺

3. 深度尺：1 Caliper 卡尺 | 2 Depth Gage 深度尺 | 3 Height Gage 高度尺

4. 深度尺;深度规：Depolarize 退极;去极 | Depth gage 深度尺;深度规 | Depth of camber 翘曲高度

depth gage什么意思

1. Straightedge rule (square rule, slide gauge, inside and outsidemicrometer, steel tape, feeler, dial gauge, depth micrometer, wire gage, radius gage, thread pitch gage) is a kind of common measuring tool.
    直尺（角尺、游标卡尺、内径和外径千分尺、钢卷尺、塞尺、千分表、深度千分尺、线规、半径规、螺距规）是一种常用量具。

2. Straightedge rule(square rule, slide gauge, inside and outside micrometer, steel tape, feeler, dial gauge, depth micrometer, wire gage, radius gage, thread pitch gage)is akind of common measuring tool.
    直尺(角尺、游标卡尺、内径和外径千分尺、钢卷尺、塞尺、千分表、深度千分尺、线规、半径规、螺距规)是一种常用量具。

3. Machining spine depth plug gage based on previous structure size often caused heat treatment deformation with difficulty of satisfying the drawing requirements of arc size, surface roughness go and no go size, which resulted in high reject percentage.
    键槽深度塞规按照以往的结构尺寸进行加工，易产生热处理变形，且磨削出的圆弧尺寸、表面粗糙度及通、止端尺寸难达到图纸要求，存在很高的废品率。

4. Structure Improvement for Spline Depth Plug Gage
    键槽深度塞规结构改进

danci.911cha.com

5. The Gage 82G high-speed data acquisition card was applied in laser rangefinder, its hardware setting parameter includes sample rates, sample mode, trigger source, trigger depth, input impedance and trigger slope.
    将高速采集卡GAGE82G应用于激光测距机，其硬件设置含采样速率、采样模式、触发源、触发深度、输入电阻、触发沿等参数。

noun